Anaerobic

Retainers represent the ultimate strength in Anaerobic Technology, exceeding international standards, and allowing confidence in application. Once cured, this grade will retain its full strength, and will not suffer fatigue due to load stress.

Features:
Colour coded green
High Strength
Low Viscosity
Colour of product:
Yellow

R938
R938 Dynamic Strength Retaining Compound is designed to give high strength retention under cyclic loading The product also provides the advantage of low corrosivity with the added benefit of WRAS approval for potable water both hot and cold while conforming to MIL-R-406824, type II strength classification.

Features:
Dynamic shock resistance
Ultra high strength loading
Fast cure system
Stainless steel compatible
WRAS approved (WRC/NSF) BS6920 Cert No: 0411511 for hot and cold water
Colour of product:
Green

Permanent stud locking.
WRC hot and cold water approved.
Thread lockers secure parts in load bearing situations by resisting shock, constant vibration and prevent failure. In its liquid state, the thread locker completely fills and seals the thread form, which prevents rust and corrosion once it's cured into its hard plastic state. The thread locker then requires a predetermined amount of force to break the bond and release the fitting/thread. All of the thread lockers utilize a colour code system, for easy recognition.

Features:
Permanent
Surface insensitive
Very strong
Chemical resistant
Colour coded green and red (also available as T71)
High strength, high breakloose
Medium viscosity
For parts not requiring disassembly
Colour of product:
Green

T971 Studlocker provides permanent strength and is resistant up to 175°C. Its excellent chemical resistance also makes it an ideal sealant resisting fuels, lubricants and most other industrial liquids and gases, T971 is extremely well suited to harsh environments where disassembly is not required.

Features:
Suitable for high temperatures up to 175°C
Fast cure system
Permanent locking
High shock resistances
Colour of product:
Red

T943 Threadlocker is designed to perform in harsh environments at elevated temperatures up to 160°C. It retains all the capabilities of a standard threadlocker whilst attaining a strength band of up to 22N.m. Typically conventional threadlockers will withstand 150°C but with reduced strength. Whilst it has excellent locking and sealing capabilities, it has the added benefit of allowing disassembly with standard hand tools. T943 is particularly suitable on less active surfaces, such as stainless steel and plated metals..

Features:
Suitable for high temperatures up to 160°C
Removable
Oil tolerant
Controlled medium locking strength
WRAS approved (WRC/NSF)
BS6920 Certified for Hot and Cold water
Colour of product:
Blue

S977 Pipe Sealant is a multipurpose, highly accredited instant sealer for all types of threaded metal assemblies. Using the latest P.T.F.E sealer technology it provides high adhesion capability on various metals even at high temperatures where expansion in parts has previously been known to cause leakages. It is fully approved for both hot and cold WRAS water usage and also has BS EN 751-1 for both liquids and gases. S977 is suitable for most metals where as other sealants have problems setting on inactive metals such as Stainless Steel and passivated surface coatings, S977 remains fast curing without the need for an activator. S977 is not suitable for oxygen rich systems under pressure.

Features:
Thixotropic formulation
Stainless steel compatible
Seals fittings up to 75mm diameter
Gas and water approved
AGA. Australian gas approved up to 135°C
DVGW approved to BS EN751-1 2007
WRAS (WRC.NSF) BS6920. Cert No: 0411511 for hot & cold water
Colour of product:
Yellow

P.T.F.E pipe sealant.
S72 White Pipeseal is an Instant Low Pressure sealant for fine and coarse threads up to 2” in diameter. S72 is unusual in that it does not fully cure until some 60 hours after application, allowing re-alignment of elbows and joints.

Features:
White pipe sealant
Very slow cure allows realignment
Low pressure seal
Colour of product:
White

A011 Permabond Anaerobic Thread Locking Adhesive 50ml

A011 is an anaerobic adhesive designed for low strength locking and sealing of threaded or coaxially fitting metal parts where subsequent dismantling is required. A011's controlled strength ensures high levels of fatigue, vibration and corrosion resistance on large or fragile components, whilst still allowing assemblies to be stripped down using normal tools.
A011 has WRAS Water Industry Approval for use with potable water.

A011 Industry applications include for : Electronics, Hydraulics, Pneumatics and Water
DATA SHEET

A113 Permabond Anaerobic Thread Locking Adhesive 50ml

A113 is a low viscosity anaerobic adhesive designed for the medium strength locking and sealing of metal parts Permabond and it is ideally suited for use on components that need to be dismantled for maintenance. This gives outstanding vibration resistance and it can be used to replace a wide range of mechanical locking devices. A113's excellent chemical resistance makes it suitable for sealing small hydraulic and pneumatic fittings and it can dramatically reduce the effects of corrosion.
A113 has WRAS Water Industry Approval for use with potable water.

A113 Industry applications include for : Electronics, Hydraulics, Pneumatics and Water
DATA SHEET

A118 Permabond Anaerobic Retaining Adhesive 10ml

A118 is a medium viscosity anaerobic adhesive designed to provide high strength permanent locking and sealing of metal parts, such as bearings, gears, studs, inserts and any threaded components. A118 provides high strength, excellent durability and resistance to vibration, fatigue, fretting and corrosion. These A118 features allow machining tolerances to be relaxed and they allow mechanical locking devices to be eliminated or reduced, giving consequent cost savings. A118 is fluorescent under UV backlight, so it is ideal for confirming its presence when passing under an inspection lamp in high speed production lines.
A118 has WRAS Water Industry Approval for use with potable water.

A118 Industry applications include for : Electronics, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A118 Permabond Anaerobic Retaining Adhesive 50ml

A118 is a medium viscosity anaerobic adhesive designed to provide high strength permanent locking and sealing of metal parts, such as bearings, gears, studs, inserts and any threaded components. A118 provides high strength, excellent durability and resistance to vibration, fatigue, fretting and corrosion. These A118 features allow machining tolerances to be relaxed and they allow mechanical locking devices to be eliminated or reduced, giving consequent cost savings. A118 is fluorescent under UV backlight, so it is ideal for confirming its presence when passing under an inspection lamp in high speed production lines.
A118 has WRAS Water Industry Approval for use with potable water.

A118 Industry applications include for : Electronics, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A118 Permabond Anaerobic Retaining Adhesive 200ml

A118 is a medium viscosity anaerobic adhesive designed to provide high strength permanent locking and sealing of metal parts, such as bearings, gears, studs, inserts and any threaded components. A118 provides high strength, excellent durability and resistance to vibration, fatigue, fretting and corrosion. These A118 features allow machining tolerances to be relaxed and they allow mechanical locking devices to be eliminated or reduced, giving consequent cost savings. A118 is fluorescent under UV backlight, so it is ideal for confirming its presence when passing under an inspection lamp in high speed production lines.
A118 has WRAS Water Industry Approval for use with potable water.

A118 Industry applications include for : Electronics, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A126 Permabond Anaerobic Retaining Adhesive 50ml

A126 is a very low viscosity, high strength tough anaerobic adhesive for permanent assembly of coaxial assemblies or threaded metal components. The exceptionally low viscosity of A126 makes it ideal for use on tight fitting components, or where the adhesive needs to be applied after assembly. A126 will wick by capillary action into hairline cracks in castings and welds to provide an effective repair and seal. In addition, it may also be used to seal surface porosity in welds and castings.
A126 has WRAS Water Industry Approval for use with potable water.

A126 Industry applications include for : Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A130 Permabond Anaerobic Thread Locking Adhesive 10ml

A130 is a low viscosity anaerobic adhesive designed for the medium locking and sealing of metal parts and so A130 is ideally suited for use on components that need to be dismantled for maintenance. A130 gives outstanding vibration resistance and it can be used to replace a wide range of mechanical locking devices. A130 has excellent chemical resistance which makes it suitable for sealing small hydraulic and pneumatic fittings and it can dramatically reduce the effects of corrosion.
A130 has WRAS Water Industry Approval for use with potable water.

A130 Industry applications include for : Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A130 Permabond Anaerobic Thread Locking Adhesive 50ml

A130 is a low viscosity anaerobic adhesive designed for the medium locking and sealing of metal parts and so A130 is ideally suited for use on components that need to be dismantled for maintenance. A130 gives outstanding vibration resistance and it can be used to replace a wide range of mechanical locking devices. A130 has excellent chemical resistance which makes it suitable for sealing small hydraulic and pneumatic fittings and it can dramatically reduce the effects of corrosion.
A130 has WRAS Water Industry Approval for use with potable water.

A130 Industry applications include for : Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A130 Permabond Anaerobic Thread Locking Adhesive 200ml

A130 is a low viscosity anaerobic adhesive designed for the medium locking and sealing of metal parts and so A130 is ideally suited for use on components that need to be dismantled for maintenance. A130 gives outstanding vibration resistance and it can be used to replace a wide range of mechanical locking devices. A130 has excellent chemical resistance which makes it suitable for sealing small hydraulic and pneumatic fittings and it can dramatically reduce the effects of corrosion.
A130 has WRAS Water Industry Approval for use with potable water.

A130 Industry applications include for : Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A131 Permabond Anaerobic Pipe Sealing Adhesive 50ml

A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water. A131 is suitable for use on both parallel and tapered threads. The delayed cure of A131 allows accurate alignment adjustment of components. A131 is capable of giving an instant pressure seal and it does not dry out like many mastic sealants. In this way, rework can be eliminated. If disassembly is necessary, this can be accomplished using normal tools. A131 is approved for use by Lotus Cars.
A131 has WRAS Water Industry Approval for use with potable water.

A131 Industry applications include for : Fire Sprinklers, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A131 Permabond Anaerobic Pipe Sealing Adhesive 200ml

A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water. A131 is suitable for use on both parallel and tapered threads. The delayed cure of A131 allows accurate alignment adjustment of components. A131 is capable of giving an instant pressure seal and it does not dry out like many mastic sealants. In this way, rework can be eliminated. If disassembly is necessary, this can be accomplished using normal tools. A131 is approved for use by Lotus Cars.
A131 has WRAS Water Industry Approval for use with potable water.

A131 Industry applications include for : Fire Sprinklers, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A134 Permabond Anaerobic Retaining Adhesive 50ml

A134 is a high strength anaerobic adhesive which is designed for the permanent locking and sealing of metal parts. It has a thixotropic 'non-drip formulation which makes it suitable for use on larger diameter fittings, for coarse threads. A134 is ideally suited for the renovation of assemblies where wide tolerances are expected due to thread damage or wear. It can also extend the life of components by reducing the effects of corrosion in aggressive environments. A134 has water industry approval and it is suitable for use in contact with potable water and it has good performance in marine salt water environments. It will withstand temperatures from -55 to +150° C. A134 is approved for use by Lotus Cars.
A134 has WRAS Water Industry Approval for use with potable water.

A134 Industry applications include for : Water and Sewage, Mechanical Engineering, Pneumatics, Hydraulics and it has Water Industry Approval
DATA SHEET

A134 Permabond Anaerobic Retaining Adhesive 200ml

A134 is a high strength anaerobic adhesive which is designed for the permanent locking and sealing of metal parts. It has a thixotropic 'non-drip formulation which makes it suitable for use on larger diameter fittings, for coarse threads. A134 is ideally suited for the renovation of assemblies where wide tolerances are expected due to thread damage or wear. It can also extend the life of components by reducing the effects of corrosion in aggressive environments. A134 has water industry approval and it is suitable for use in contact with potable water and it has good performance in marine salt water environments. It will withstand temperatures from -55 to +150° C. A134 is approved for use by Lotus Cars.
A134 has WRAS Water Industry Approval for use with potable water.

A134 Industry applications include for : Water and Sewage, Mechanical Engineering, Pneumatics, Hydraulics and it has Water Industry Approval
DATA SHEET

A136 Permabond Ready Gasket Anaerobic Adhesive 50ml

A136 is a high viscosity anaerobic resin paste designed for making medium strength 'formed in situ' gaskets between metal surfaces. A136 is capable of replacing a wide range of conventional gasket materials, thereby offering the potential for reduced stock holdings of pre-shaped gaskets. By allowing a full surface to surface contact, load transmission can be improved. Because the gasket adhesive product does not shrink, creep or relax after curing, there are no shimmer effects and there is no requirement for later bolt retightening. The excellent chemical resistance of A136 allows it to be used in applications for sealing a wide variety of gases and liquids at a wide range of temperatures.
A136 has WRAS Water Industry Approval for use with potable water.

A136 Industry applications include for : Automotive, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

A1042 Permabond Thread Locking Anaerobic Adhesive 50ml

A1042 is a rapid curing medium viscosity medium strength anaerobic adhesive designed to lock and seal metal parts which may need to be dismantled later for maintenance. A1042 has high vibration resistance which makes it particularly suited to replacing lock-washers, split-pins and other mechanical locking devices. The well proven chemical resistance of A1042 will reduce the effects of corrosion and make it suitable for sealing hydraulic and pneumatic fittings. It is also suitable for use with galvanised zinc coated steel. This product is also known as "Perma-Lok" A1042.

A1042 Industry applications include for : Water and Sewage, Mechanical Engineering, Pneumatics, Hydraulics and it has Water Industry Approval
DATA SHEET

A1044 Permabond Pipe Sealing Anaerobic Adhesive 50ml

A1044 is a rapid curing medium strenfgth high viscosity anaerobic adhesive sealant designed to lock and seal metal pipe connections. It offers a very good resistance to even the most aggressive chemicals. A1044 can be used to seal against most gases and liquids and it can provide an instant pressure seal, minimising down-time and speeding up production processes. Unlike PTFE tape or hemp, A1044 will not shred nor dry out, so it will provide a very durable seal and help to extend the life of the components. This product is also known as "Perma-Lok" A1044.

A1044 Industry applications include for : Fire Sprinklers, Water and Sewage, Mechanical Engineering, Pneumatics, Hydraulics and it has Water Industry Approval
DATA SHEET

A1044 Permabond Pipe Sealing Anaerobic Adhesive 200ml

A1044 is a rapid curing medium strenfgth high viscosity anaerobic adhesive sealant designed to lock and seal metal pipe connections. It offers a very good resistance to even the most aggressive chemicals. A1044 can be used to seal against most gases and liquids and it can provide an instant pressure seal, minimising down-time and speeding up production processes. Unlike PTFE tape or hemp, A1044 will not shred nor dry out, so it will provide a very durable seal and help to extend the life of the components. This product is also known as "Perma-Lok" A1044.

A1044 Industry applications include for : Fire Sprinklers, Water and Sewage, Mechanical Engineering, Pneumatics, Hydraulics and it has Water Industry Approval
DATA SHEET

A1046 Permabond Retaining Anaerobic Adhesive

A1046 is a rapid curing, medium viscosity, high strength, toughened, anaerobic retainer adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, pulleys and threaded components. A1046 provides high strength and excellent durability, even under the most difficult conditions. A1046 helps bonded joints to resist vibration, fatigue, fretting and corrosion. It is ideal for bonding dissimilar metals which prevents galvanic corrosion. A1046 allows machining tolerances to be relaxed and mechanical locking devices to be eliminated. As a result, A1046 will help reduce production, assembly and processing costs. This product is also known as "Perma-Lok" A1046.

A1046 Industry applications include for : Coal and Mineral Mining, Water and Sewage, Mechanical Engineering, Pneumatics, Hydraulics
DATA SHEET

People who bought this item also bought:

1. A905 Permabond Surface Activator 200ml

2. PERMACLEAN II Bondmaster Surface Cleaner 400ml

F201 Permabond Anaerobic Retaining Adhesive 50ml

F201 is a toughened medium viscosity anaerobic adhesive with very high strength which has been developed to give excellent resistance to peel and impact forces. F201 is toughened and this makes it resistant to peel and impact forces. This combined with its good adhesion to aluminium and copper alloys and any dissimilar metal combinations makes it the first choice when relatively thin or light-weight components are being bonded which may be subject to distortion in service. F201 has an improved fatigue life and is also capable of resisting the thermal stresses that may be generated when bonding dissimilar surfaces.

F201 Industry applications include for : Boiler Manufacturing, Water Heaters, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

F201 Permabond Anaerobic Retaining Adhesive 200ml

F201 is a toughened medium viscosity anaerobic adhesive with very high strength which has been developed to give excellent resistance to peel and impact forces. F201 is toughened and this makes it resistant to peel and impact forces. This combined with its good adhesion to aluminium and copper alloys and any dissimilar metal combinations makes it the first choice when relatively thin or light-weight components are being bonded which may be subject to distortion in service. F201 has an improved fatigue life and is also capable of resisting the thermal stresses that may be generated when bonding dissimilar surfaces.

F201 Industry applications include for : Boiler Manufacturing, Water Heaters, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

F202 Permabond Anaerobic Toughened Retaining Adhesive 50ml

F202 is a toughened thixotropic "non-drip" anaerobic adhesive with very high strength which has been developed to give excellent resistance to peel and impact forces. F202 has a high viscosity. It is primarily designed for use on metal surfaces including any combination of dissimilar metals. F202 is also capable of resisting the thermal stresses that may be generated when bonding dissimilar surfaces. Its non-drip' consistency makes it suitable for use on larger fittings or where wide tolerances are expected.

F202 Industry applications include for : Boiler Manufacturing, Water Heaters, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

F202 Permabond Anaerobic Toughened Retaining Adhesive 200ml

F202 is a toughened thixotropic "non-drip" anaerobic adhesive with very high strength which has been developed to give excellent resistance to peel and impact forces. F202 has a high viscosity. It is primarily designed for use on metal surfaces including any combination of dissimilar metals. F202 is also capable of resisting the thermal stresses that may be generated when bonding dissimilar surfaces. Its non-drip' consistency makes it suitable for use on larger fittings or where wide tolerances are expected.

F202 Industry applications include for : Boiler Manufacturing, Water Heaters, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

HH131 Permabond Anaerobic Thread Locking Adhesive 50ml

HH131 is a very high temperature resistant and High strength High viscosity anaerobic thread-locker and sealant paste. This adhesive cures in the absence of air between tight fitting metal parts. It is used for locking bolts, nuts and screws which require permanent assembly. HH131 is ideally suited for applications requiring high temperature resistance. It has a high viscosity which allows for ease of use on coarse threaded fasteners. The cure is fast and reliable on mild and carbon steel, stainless steel and fasteners plated with cadmium, zinc, etc. The main areas of use include for machinery and in equipment manufacturing. Additional uses include for sealing pipe flanges and for retaining worn bearings. HH131 has high viscosity and a thixotropic nature which allows gap filling up to 10 mm.

HH131 Industry applications include for : Auto-claves, Heating Systems, Mechanical Engineering, Pneumatics, Hydraulics and Water
DATA SHEET

LH197 Permabond Anaerobic Gasket Adhesive 75ml

LH197 "Gasketmaker" is an anaerobic flange sealing adhesive resin which can replace gaskets, or it can be used as a dressing for conventional pre-formed gaskets. It is a flowable paste, so it will conform to the shape of the flange. The free-flow consistency allows metal to metal contact of the flanges while filling the areas where no contact exists because of surface irregularities. LH197 provides a uniform load distribution and eliminates the need for re-torquing of fasteners because of stress relaxation of the flange bolts. It provides an instant seal and depending on the gap and flange width, it can provide an ultimate seal up to 5000psi / 355 bar. LH197 is best suited for applications requiring high temperature resistance. Because of the flexible nature of the cured polymer seal, LH197 has good vibration and shock resistance. It also provides easy assembly and easy disassembly using normal tools. LH197 will withstand temperatures from -55 to +150° C.

LH197 Industry applications include for High Temperature Mechanical Engineering and Maintenance applications including : Automotive, Machinery, Pumps, Pneumatics, Hydraulics
DATA SHEET

MH052 Permabond Anaerobic Adhesive 75ml

MH052 is an anaerobic adhesive which is ideal for the sealing of threaded joints in pipework. It is approved for use with gases for sealing pipe joints with at up to 60°C with working pressures up to 365psi / 26 bar for most gases and for gaseous oxygen at up to 140psi / 10 bar. MH052 seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Unlike PTFE tape or hemp, Permabond MH052 will not shred nor creep, so it will provide a durable seal, and so helping to extend the life of the components. MH052 has gas and water supply industry approvals from WRAS, BAM and DVGW.

MH052 Industry applications include for : Fire Protection, Sprinkler Systems, Pneumatics, Hydraulics, Pipework
DATA SHEET

MH196 Permabond Anaerobic Gasketing Adhesive 75ml

MH196 "Gasketmaker" is a Medium strength High viscosity high temperature resistant anaerobic adhesive resin which provides a rigid flange sealant which can replace all sizes of gaskets, or it can be used as a dressing for conventional pre-cut gaskets. The thixotropic non-drip property of MH196 prevents migration of the sealant before and during cure and allows the resin to conform to the shape of the flange. The consistency allows metal to metal contact of the flanges and it will fill the areas where no contact exists because of surface irregularities. MH196 results in uniform stress distribution and eliminates the need for re-torquing later. MH196 provides an instant low pressure seal depending on gap and flange widths and it will provide a good high pressure seal up to 5000 psi / 355 bar. MH196 is ideally suited for applications requiring high temperature resistance. Because of the flexible nature of the cured polymer, MH196 has good vibration and shock resistance and it does not creep nor shrink. MH196 also provides easy assembly and dis-assembly. MH196 will withstand temperatures from -55 to +200° C.

MH196 Industry applications include for High Temperature Mechanical Engineering and Maintenance applications including : Automotive, Crane Maintenance, Machinery, Pumps, Pneumatics, Hydraulics
DATA SHEET

MH199 Permabond Anaerobic Gasketing Adhesive 75ml

MH199 "Gasketmaker" is a Medium strength high temperature resistant anaerobic adhesive resin which provides a rigid flange sealant which can replace gaskets, or it can be used as a dressing for conventional pre-cut gaskets. The thixotropic non-drip property of MH199 prevents migration of the sealant before and during cure and allows the resin to conform to the shape of the flange. The consistency allows metal to metal contact of the flanges and it will fill the areas where no contact exists because of surface irregularities. MH199 results in uniform stress distribution and eliminates the need for re-torquing later. MH199 provides an instant low pressure seal depending on gap and flange widths and it will provide a good high pressure seal up to 5000 psi / 355 bar. MH199 is ideally suited for applications requiring high temperature resistance. Because of the flexible nature of the cured polymer, MH199 has good vibration and shock resistance and it does not creep nor shrink. It also provides easy assembly and dis-assembly. MH199 will withstand temperatures from -55 to +150° C.

MH199 Industry applications include for High Temperature Mechanical Engineering and Maintenance applications including : Automotive, Crane Maintenance, Machinery, Pumps, Pneumatics, Hydraulics
DATA SHEET