HomeSite MapSearchCheckoutStore TopUp a LevelContact Us
View Cart |Checkout
Items:, Value:
Login
Online Shop | Dispensing
Quantity:
PQ50-P Heavy Duty Plastic Glue Dispensing GunPQ50-P is a twin push-rod, light-weight 1:1 ratio glue dispensing gun made of heavy duty plastic. This gun will hold a 50ml dual barrel cartridge securely. It has a gun type handgrip and a trigger which advances the push rods by a ratchet mechanism to dispense the 2 parts of adhesive. It is used for dispensing glue from most makes of two part 1:1 and 2:1 ratio adhesives from 50ml dual cartridges. The twin push-rod plunger is suitable for both 1:1 and 2:1 ratios. It is used for dispensing Two Part Adhesives in Twin Pack Cartridges, such as :Structural Acrylic Adhesive - 50 ml (Normally using a 3.25" or 4.50" Green square nozzle).Two Part Epoxy Adhesive - 50 ml (Normally using a 3.25" or 5.00" White round nozzle).People who bought this item also bought:
PQ201 Glue Dispensing GunPQ201 is a twin push-rod 1:1 ratio glue dispensing gun made of steel. It is used for dispensing most makes of two part 1:1 ratio adhesive from 200ml dual cartridges held by the gun.
PQ401 Glue Dispensing GunPQ401 is a twin push-rod 1:1 ratio glue dispensing gun made of steel. It is used for dispensing most makes of two part 1:1 ratio adhesive from 400ml dual cartridges held by the gun.
MN125 Small White Round Mixer NozzleMN125 is a small, round, 1 : 1 ratio adhesive mixer nozzle. It is used for accurately dispensing epoxy resin adhesives. It is used for dispensing two part adhesives supplied in 50ml dual cartridges. The nozzle is attached to the top of the glue cartridge by locating it after removing the cap and locking by a half turn. It will then mix the two parts or components of the adhesive evenly as they are being pumped out by the dual plunger glue dispensing gun. Length 128mm (6"), tube diameter 9mm. MN125 is normally used for epoxy adhesives.Acrylic adhesives normally use a different small green square nozzle called : 50ML GREEN. People who bought this item also bought:
50ML GREEN Small Green Square Mixer Nozzle 50ML GREEN is a small, square, 1 : 1 ratio adhesive mixer nozzle. It is used for accurately dispensing acrylic resin adhesives. It is used for dispensing two part adhesives supplied in 50ml dual cartridges. The nozzle is attached to the top of the glue cartridge by locating it after removing the cap and locking by a half turn. It will then mix the two parts or components of the adhesive evenly as they are being pumped out by the dual plunger glue dispensing gun. Length 83mm, tube width 7mm. 50ML GREEN is normally used for acrylic adhesives.A slightly longer version of this nozzle with a length of 125mm is also available.Epoxy adhesives normally use a different small white round nozzle called : MN125. People who bought this item also bought:
400ML GREEN Large Green Square Mixer Nozzle400ML GREEN is a large, square, 1 : 1 ratio adhesive mixer nozzle. It is used for accurately dispensing acrylic resin adhesives. It is used for dispensing two part adhesives supplied in 200ml and 400ml dual cartridges. The nozzle is attached to the top of the glue cartridge by locating it after removing the cap and locking by srewing down a threaded cap. It will then mix the two parts or components of the adhesive evenly as they are being pumped out by the dual plunger glue dispensing gun. Length 147mm, tube width 11mm. 400ML GREEN is normally used for acrylic adhesives, but it can be used for epoxy adhesives. Also called : Type 8.7 / 24 Z.Epoxy adhesives are normally supplied with and use a different large white round nozzle. However, the large green nozzle is also suitable for use with similar sized epoxy adhesives.People who bought this item also bought:
Copyright © 2009 Glueline.co.uk - Adhesive Solutions for Industry
