Two part epoxy

E01 Loctite® Two Part Epoxy Adhesive 50ml

E01 epoxy resin is a general purpose, fast setting, two part, 1:1 epoxy adhesive. E01 will bond to a wide variety of materials including wood, metal, plastic and ceramic. E01 cures rapidly and it will give good handling strength within 5 minutes. It is also available packed into a handy 'EDS' cartridge which provides metered and accurately mixed adhesive directly onto the components to be glued. These good E01 features provide an adhesive which is suitable for the rapid assembly of small components, or for fast and effective repair work. Colour is : Clear. E01 was also known as "Double Bead". Colour : Clear. E01 can withstand temperatures from -55° to +100° C. E01 is supplied in cartridges which require a glue dispensing gun. E01 cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes. E01 is also known as "Double Bead".
Loctite® E01 was previously known as "Bondmaster E01".
DATA SHEET

People who bought this item also bought:

1. E 32 Loctite® Two Part Epoxy Adhesive 50ml

E18 Loctite® Two Part Epoxy Adhesive 50ml

E18 is a two part fast setting epoxy resin adhesive which remains useable for several minutes. It is ideally suited to assemblies requiring a little time for adjusting alignment before setting and then giving handling strength after 15 minutes. E18 is available in handy 'EDS' dual cartridges which dispense correctly metered and mixed adhesive directly onto the assembly surfaces. E18 is capable of bonding a wide variety of materials including wood, metals, plastics and ceramics. Colour : Clear. E18 can withstand temperatures from -55° to +100° C. E18 is supplied in cartridges which require a glue dispensing gun. E18 in cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E18 was previously known as "Bondmaster E18".
DATA SHEET

E04 Loctite® Two Part Epoxy Adhesive 50ml

E04 is a two part, 1:1 epoxy resin adhesive. It is a very tough material used in structurally demanding applications which require excellent resistance in service to vibration and impact loading, combined with the benefit of a cure within 3 hours and a quick 30 minutes curing time when heated at 60°C. E04 is capable of bonding a wide variety of materials, such as wood, metals, plastics and ceramics. E04 is particularly suited to the assembly of composite structures made from SMC, DMC or 'wet lay-up' polyesters. E04 has over 20 years of proven performance in industry. Colour : Grey. E04 can withstand temperatures from -55° to +70°C. E04 is supplied in 5 litres tins for both Part A and Part B (both are required) and in cartridges which require a glue dispensing gun. E04 in cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E04 was previously known as "Bondmaster E04".
DATA SHEET

E32 Loctite® Two Part Epoxy Adhesive 50ml

E32 is a two part epoxy resin adhesive which has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E32 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm its excellent environmental durability. E32 can be accurately mixed and applied directly onto the assembly surfaces by using E32 in the 'EDS' cartridge pack. Colour : Grey. E32 can withstand temperatures from -55° to +80°C. E32 is supplied in 5 litres tins for both Part A and Part B (both are required) and in cartridges which require a glue dispensing gun. E32 in cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E32 was previously known as "Bondmaster E32".
DATA SHEET

People who bought this item also bought:

1. MN125 Small White Round Mixer Nozzle

2. PQ 50-P Plastic Glue Dispensing Gun

3. PERMACLEAN II Bondmaster Surface Cleaner 400ml

E32 Loctite® Two Part Epoxy Adhesive 400ml

E32 is a two part epoxy resin adhesive which has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E32 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm its excellent environmental durability. E32 can be accurately mixed and applied directly onto the assembly surfaces by using E32 in the 'EDS' cartridge pack. Colour : Grey. E32 can withstand temperatures from -55° to +80°C. E32 is also supplied in 5 litres tins for both Part A and Part B (both are required) and in cartridges - 400ml, 50ml and 200ml which require glue dispensing guns. E32 in cartridges must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E32 was previously known as "Bondmaster E32".
DATA SHEET

People who bought this item also bought:

1. Macroplexx 3295 Toughend Methacrylate Adhesive 50ml

2. 50ML GREEN Small Green Square Mixer Nozzle

E32 Loctite® Two Part Epoxy Adhesive - Part A - 5 Litres

E32 is a two part, manually mixed 1:1, toughened epoxy resin adhesive. Part A is supplied in 5 litre pales. It must be used with E32 Part B - See "E32 Part B" in this Menu. E32 has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E32 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm its excellent environmental durability. Colour : White (and Grey when mixed with Part B). E32 can withstand temperatures from -55° to +80°C. However, it can withstand temperature of up to 200°C for short periods. E32 is supplied in 5 Litres tins for both Part A and Part B (both are required) E32 must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E32 was previously known as "Bondmaster E32".
DATA SHEET

E32 Loctite® Two Part Epoxy Adhesive - Part B - 5 Litres

E32 is a two part, manually mixed 1:1, toughened epoxy resin adhesive. Part B is supplied in 5 litre pales. It must be used with E32 Part A - See "E32 Part A" in this Menu. E32 has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E32 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm its excellent environmental durability. Colour : Black (and Grey when mixed with Part A). E32 can withstand temperatures from -55° to +80°C. However, it can withstand temperature of up to 200°C for short periods. E32 is supplied in 5 Litres tins for both Part A and Part B (both are required) E32 must be kept at 20° to 25°C to avoid crystals forming when the resin gets cold. Crystals will be removed and normal consistency resumed by warming at 40°C for 20 minutes.
Loctite® E32 was previously known as "Bondmaster E32".
DATA SHEET

DOUBLE/ BUBBLE® Two Part Epoxy Adhesive 3gm - Box of 50 Sachets

DOUBLE /BUBBLE® is a general purpose, 3 minutes, fast setting, two part epoxy resin adhesive providing a long working life. DOUBLE/ BUBBLE® has a working time of 3 minutes and it is ideal for bonding many types of material including wood, metals, glass, ceramics, stone, concrete and leather. It will sustain in-service temperatures from -40° to +82°C. The DOUBLE/ BUBBLE® kit is sold in a box of 50 tear-off 3gm sachets complete with pallete cards and mixing sticks. Colour : Clear.

Typical Applications : The repair of tools, automotive parts, electrical, electronics, furniture and other applications needing fast setting.
DATA SHEET

DOUBLE/ BUBBLE "NON SAG" Two Part Epoxy Adhesive 3gm

DOUBLE / BUBBLE® NON SAG is a thixotropic (non drip), fast curing, two part, solvent-free epoxy resin adhesive providing a long working life. DOUBLE/ BUBBLE® NON SAG provides good gap fill and will not shrink. It gives a handling strength in 3 minutes and it is ideal for bonding many types of material including wood, metals, ceramics, concrete, rubber and plastics. DOUBLE/ BUBBLE® is an excellent adhesive for use with fibre-glass cloth. It will sustain in-service temperatures from -40° to +82°C. Colour, mixed : White. DOUBLE BUBBLE® NON SAG is sold individually, or in a box of 100 tear-off 3gm sachets complete with mixing sticks.

Typical Applications : The repair of tools, furniture and sports equipment.

Steel/metal epoxy repair stick.
EPS 846 is a tough, hard and fast curing epoxy mouldable compound filled with metal powders to give superior strength on applications requiring strong adhesion to parts. EPS 846 also has ability to be machined to fit the purpose. Multi-use epoxy in stick form enables small or large repairs to be made, simply by cutting and kneading the putty into a consistent ball and contouring it to your needs.

Features:
Easy to machine, drill, or sand to shape for invisible repairs
Colour of product:
Grey
Sizes:
178mm long stick inside a protective tube

E14 Loctite® - Two Part Epoxy Adhesive

E14 is a two part, 7:1 epoxy resin adhesive which has been formulated for the potting and encapsulation of electronic components. It possesses excellent arc-track resistance and fire retardency qualities combined with good thermal conductivity. E14 is a fire retardant material which has low water absorption and good chemical and temperature resistance and these make it ideal for applications exposed to the weather or to aggressive environments. Colour : Green. E14 can withstand temperatures from -55° to +100° C. E14 is supplied in 5 litres tins only for both Part A and Part B (both are required).
Loctite® E14 is a discontinued Loctite® product was previously known as "Bondmaster E14".

E14 Loctite® - Bondmaster Two Part Epoxy Adhesive

E14 is a two part, 7:1 epoxy resin adhesive which has been formulated for the potting and encapsulation of electronic components. It possesses excellent arc-track resistance and fire retardency qualities combined with good thermal conductivity. E14 is a fire retardant material which has low water absorption and good chemical and temperature resistance and these make it ideal for applications exposed to the weather or to aggressive environments. Colour : Green. E14 can withstand temperatures from -55° to +100° C. E14 is supplied in 5 litres tins only for both Part A and Part B (both are required).
Loctite® E14 is a discontinued Loctite® product was previously known as "Bondmaster E14".
DATA SHEET

E11A Loctite® Two Part Epoxy Resin

E11 is a low viscosity, two part, 1:1 epoxy adhesive which has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E11 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm E11's excellent environmental durability. E11 is similar to E32, but E11's lower viscosity makes it more suitable for applications where a thin bond line is ideal. Colour : Cream. E11 can withstand temperatures from -55° to +80° C. E11 is supplied in 5 litres tins only for both Part A and Part B (both are required).
Loctite® E11 was previously known as "Bondmaster E11".
DATA SHEET

E11 is a low viscosity, two part, 1:1 epoxy adhesive which has remarkable resistance to both static and dynamic loading. It bonds to a wide variety of materials including metals, composites, ceramics and wood. E11 has been selected for many industrial assemblies where structural integrity is required. Applications extending back over 20 years confirm E11's excellent environmental durability. E11 is similar to E32, but E11's lower viscosity makes it more suitable for applications where a thin bond line is ideal. Colour : Cream. E11 can withstand temperatures from -55° to +80° C. E11 is supplied in 5 litres tins only for both Part A and Part B (both are required).
Loctite® E11 was previously known as "Bondmaster E11".

E15 Loctite® Two Part Epoxy Resin 3-2 mix

E15 is a versatile adhesive capable of bonding a wide variety of similar or dissimilar surfaces, including some of the more "difficult to glue" materials. E15 has a long usable life before setting and it produces high strength joints capable of resisting fatigue and impact loads. On Composites, E15 is capable of strengths similar to that achieved on steel, but in most cases, The composite surface will fail before the glue does. Colour : Ivory. E15 is supplied in 5 litres tins only for both Part A and Part B (both are required).
Loctite® E15 was previously known as "Bondmaster E15".
DATA SHEET

E15B Loctite® Two Part Epoxy Resin 3-2 mix

E15 is a versatile adhesive capable of bonding a wide variety of similar or dissimilar surfaces, including some of the more "difficult to glue" materials. E15 has a long usable life before setting and it produces high strength joints capable of resisting fatigue and impact loads. On Composites, E15 is capable of strengths similar to that achieved on steel, but in most cases, The composite surface will fail before the glue does. Colour : Ivory. E15 is supplied in 5 litres tins only for both Part A and Part B (both are required).
Loctite® E15 was previously known as "Bondmaster E15".

ET538 Permabond Two Part Epoxy Adhesive 50ml

ET538 is a structural, high strength, toughened epoxy adhesive which is cured at room-temperature. ET538 is thixotropic (non-drip) and it will bond to a wide variety of surfaces such as wood, metals, ceramics and many plastics and composite materials. ET538 exhibits good resistance to petrol, oils and water and it has an extended cure time making it more suitable for larger applications, or for batch production processes. Its thixotropic “non-slump” nature makes it suitable for gap filling or for vertical or inverted applications. It has a long useable time of 60 to 90 minutes and it can be used in temperatures from -40° up to +80°C. This product must be dispensed by a PQ50 handgun, see "Dispensing" in Menu.
DATA SHEET

ET538 Permabond Two Part Epoxy Adhesive 400ml

ET538 is a structural, high strength, toughened epoxy adhesive which is cured at room-temperature. ET538 is thixotropic (non-drip) and it will bond to a wide variety of surfaces such as wood, metals, ceramics and many plastics and composite materials. ET538 exhibits good resistance to petrol, oils and water and it has an extended cure time making it more suitable for larger applications, or for batch production processes. Its thixotropic “non-slump” nature makes it suitable for gap filling or for vertical or inverted applications. It has a long useable time of 60 to 90 minutes and it can be used in temperatures from -40° up to 80°C. This product must be dispensed by a PQ401 handgun, see "Dispensing" in Menu.
DATA SHEET

ET536 Permabond Two Part Epoxy Adhesive 50ml

ET536 is a structural, high strength, toughened epoxy adhesive which is cured at room-temperature. ET536 is thixotropic (non-drip) and it will bond to a wide variety of surfaces such as wood, metals, ceramics and many plastics and composite materials. ET536 exhibits good resistance to petrol, oils and water and it has an extended cure time making it more suitable for larger applications, or for batch production processes. Its thixotropic “non-slump” nature makes it suitable for gap filling or for vertical or inverted applications. It has a long useable time of 60 to 90 minutes and it can be used in temperatures from -40° up to 80°C. This product must be dispensed by a PQ50 handgun, see "Dispensing" in Menu.
DATA SHEET

People who bought this item also bought:

1. PQ 50-P Plastic Glue Dispensing Gun

ET536 Permabond Two Part Epoxy Adhesive 400ml

ET536 is a structural, high strength, toughened epoxy adhesive which is cured at room-temperature. ET536 is thixotropic (non-drip) and it will bond to a wide variety of surfaces such as wood, metals, ceramics and many plastics and composite materials. ET536 exhibits good resistance to petrol, oils and water and it has an extended cure time making it more suitable for larger applications, or for batch production processes. Its thixotropic “non-slump” nature makes it suitable for gap filling or for vertical or inverted applications. It has a long useable time of 60 to 90 minutes and it can be used in temperatures from -40° up to 80°C. This product must be dispensed by a PQ401 handgun, see "Dispensing" in Menu.
DATA SHEET

People who bought this item also bought:

1. PQ 401 Glue Dispensing Gun

ET500 Permabond Two Part Epoxy Adhesive 25ml

ET500 is a general purpose very fast setting two part expoxy resin adhesive. ET500 is ideal for bonding to a wide variety of surfaces such as wood, metal, ceramics and many plastic and composite materials. ET500 cures rapidly to give a handling strength in approximately 5 minutes at room temperature. It can be used in temperatures from -40° up to 100°C. Colour is : Clear transparent and it will not yellow with age.
DATA SHEET

ET500 Permabond Two Part Epoxy Adhesive 50ml

ET500 is a general purpose very fast setting two part expoxy resin adhesive. ET500 is ideal for bonding to a wide variety of surfaces such as wood, metal, ceramics and many plastic and composite materials. ET500 cures rapidly to give a handling strength in approximately 5 minutes at room temperature. This product must be dispensed by a PQ50 handgun, see "Dispensing" in Menu. It can be used in temperatures from -40° up to 100°C. Colour is : Clear transparent and it will not yellow with age.
DATA SHEET

People who bought this item also bought:

1. PQ 50-P Plastic Glue Dispensing Gun

2. 50ML GREEN Small Green Square Mixer Nozzle

ET515 Permabond Two Part Epoxy Adhesive

ET515 is a highly flexible two part exposy resin adhesive which will bond to a wide variety of surfaces such as wood, metals, ceramics, many plastics and composite materials. ET515 has a relatively rapid setting time. It is ideal for bonding dissimilar materials where differential thermal expansion is anticipated. ET515 is clear and flexible when cured and it has excellent peel and impact resistance. This product must be dispensed by a PQ50 handgun, see "Dispensing" in Menu. It can be used in temperatures from -40° up to 80°C. Colour is : Amber, slightly.
DATA SHEET

ET540 Permabond Two Part Epoxy Adhesive 400ml kit

ET540 is a high temperature resistant, two part, 2:1 epoxy adhesive which cures at room temperature. It is available in a handy 400ml EDS cartridge. It will bond to a wide variety of surfaces such as wood, metals, ceramics and many plastics and composite materials. ET540 provides good resistance to petrol, oils and water. It has an extended curing time which makes it more suitable for larger applications and for batch production processes. The thixotropic - non-drip nature of ET540 makes it suitable for gap filling or for application on vertical and inverted overhead surfaces. It can be used in temperatures from -40° up to 120°C and up to 150°C for short periods. This product must be dispensed by a 2:1 400ml handgun, see "Dispensing" in Menu. Colour, mixed : Pale Amber. This kit comes with a PQ401 handgun and a can of permaclean.

ET540 Permabond Two Part Epoxy Adhesive 400ml

ET540 is a high temperature resistant, two part, 2:1 epoxy adhesive which cures at room temperature. It is available in a handy 400ml EDS cartridge. It will bond to a wide variety of surfaces such as wood, metals, ceramics and many plastics and composite materials. ET540 provides good resistance to petrol, oils and water. It has an extended curing time which makes it more suitable for larger applications and for batch production processes. The thixotropic - non-drip nature of ET540 makes it suitable for gap filling or for application on vertical and inverted overhead surfaces. It can be used in temperatures from -40° up to 120°C and up to 150°C for short periods. This product must be dispensed by a 2:1 400ml handgun, see "Dispensing" in Menu. Colour, mixed : Pale Amber.
DATA SHEET

FE-RAPID Loctite® - Two Part Epoxy Adhesive E3726 - 400gm

FE-RAPID is a two part epoxy metal filled adhesive. It is a heavy paste resin designed for use in industry for fast repairs to damaged metalwork, such as castings, pipes, valves and engines. Once working strength has been achieved, FE-RAPID can be machined, drilled, tapped or sawn in the same way as solid metal. This adhesive is suitable for both bondng and aplying over the surfaces of all common metals to provide an almost invisible repair on the darker metallic surfaces like iron and steel. The product has excellent resistance to abrasion, chemicals and corrosion. Colour : Grey. It can withand temperatures from -55 to +100°C. For short periods, it can endure 200°C. This product is also known as : E3726.
Loctite® - Bondmaster FE-RAPID was previously known as "Bondmaster FE-RAPID".
DATA SHEET

3421 Loctite® Hysol® Two Part General Purpose Epoxy Adhesive

Loctite® Hysol® 3421 is a two part, 1:1, general purpose epoxy adhesive resin. It is a medium viscosity adhesive which cures at room temperature and will bond onto a very wide range of substrates. It gives 180 minutes working time before cure, so it is ideal for bonding large surfaces and materials which require a longer open time for final positioning adjustment before cure. 3421 is ideal for bonding metals, ceramics, glass and most plastics and it provides excellent resistance to humid conditions. Colour : Clear Amber. 3421 will sustain service temperatures up to 100°C.

3425 Loctite® Hysol® Two Part Toughened Epoxy Adhesive

Loctite® Hysol® 3425 is a two part, 1:1, toughened epoxy adhesive resin. It is a high viscosity non-drip adhesive paste which cures at room temperature and will bond onto a very wide range of substrates. It gives 120 minutes working time before cure, so it is ideal for bonding large surfaces which require a longer open time before cure. 3425 is ideal for gap filling, for vertical applications, for bonding metal components and rigid plastics and it provides excellent resistance to environmental conditions. Colour : Off White. 3425 will sustain service temperatures up to 120°C.

9455 Loctite® Hysol® Two Part Fast Setting Epoxy Adhesive

Loctite® Hysol® 9455 is a two part, 1:1, flexible, fast setting, epoxy adhesive resin with an optically clear glueline. It is a low viscosity, flowable and very fast curing adhesive which cures at room temperature. 9455 gives 3 minutes working time before cure, so it is ideal for bonding quick and easy fitting metal and glass assemblies which require a fast cure. 9455 is ultra clear, flexible and has high impact resistance. It is ideal for bonding and potting of optical components such as sensors and lenses. Colour : Crystal Clear. 9455 will sustain service temperatures up to 80°C.

9461 Loctite® Hysol® Two Part Toughened Epoxy Adhesive

Loctite® Hysol® 9461 is a two part, 1:1, high strength, toughened epoxy adhesive resin. It is a high viscosity, non-drip adhesive paste which cures at room temperature and will bond onto a very wide range of substrates. 9461 gives 40 minutes working time before cure, so it is ideal for bonding large surfaces or assemblies which require a longer open time before cure. Or, it can be heat cured rapidly in 4 minutes at 120°C. 9461 is ideal for bonding dissimilar materials such as GRP, SMC and composites. It is also ideal for applications requiring high peel strength, gap filling and vertical applications. Colour : Grey. 9461 will sustain service temperatures up to 100°C.

9464 Loctite® Hysol® Two Part Toughened Epoxy Adhesive

Loctite® Hysol® 9464 is a two part, 1:1, high strength, toughened epoxy adhesive resin. It is a high viscosity, non-drip adhesive paste which cures fairly quickly at room temperature and will bond onto a very wide range of substrates. 9464 gives 20 minutes working time before cure, so it is ideal for bonding surfaces or assemblies which require some final adjustment or alignment before cure. Or, it can be heat cured rapidly in 4 minutes at 120°C. 9464 is ideal for bonding dissimilar materials such as GRP, SMC and composites. It is also ideal for applications requiring high peel strength, gap filling and vertical applications. Colour : Grey. 9464 will sustain service temperatures up to 100°C.

9466 Loctite® Hysol® Two Part Fast Setting Epoxy Adhesive

Loctite® Hysol® 9466 is a two part, 2:1, high strength, epoxy adhesive resin. It is a medium viscosity adhesive paste which cures at room temperature and will bond onto a very wide range of substrates. 9466 gives 60 minutes working time before cure, so it is ideal for bonding large surfaces or assemblies which require a longer open time before cure. 9466 is a multi-purpose adhesive which is ideal for bonding metals, ceramic, glass and most plastics. Colour : Off White. 9466 will sustain service temperatures up to 120°C.

9481 Loctite® Hysol® Two Part General Purpose Epoxy Adhesive

Loctite® Hysol® 9481 is a two part, 2:1 (2.7:1 for bulk), multi-purpose epoxy adhesive paste. It is a high viscosity, optically clear adhesive paste which cures at room temperature and will bond onto a very wide range of substrates. It gives 60 minutes working time before cure, so it is ideal for bonding lmaterials which require a longer open time for final positioning adjustment before curing. 9481 is suitable for bonding metals, ceramics, glass and most plastics and it is ideal for bonding fibre-optics and printed circuit boards. Colour : Crystal Clear. 9481 will sustain service temperatures up to 80°C.

9483 Loctite® Hysol® Two Part General Purpose Epoxy Adhesive

Loctite® Hysol® 9483 is a two part, 2:1, flexible, general purpose, epoxy adhesive resin which cures ultra clear. It is a low viscosity, flowable adhesive which cures at room temperature. 9483 gives 30 minutes working time before cure, so it is ideal for bonding metal, glass and electronic assemblies which require some final positioning adjustment before curing. 9483 is ultra clear, flowable and has a low moisture absorption. It is ideal for bonding and potting where optical clarity and high strength are required. It is also ideal for bonding decorative panels and displays. Colour : Crystal Clear. 9483 will sustain service temperatures up to 100°C.

9492 Loctite® Hysol® Two Part High Temperature Epoxy Adhesive

Loctite® Hysol® 9492 is a two part, 2:1, multi-purpose, high temperature epoxy adhesive. 9492 is medium viscosity and it is useable for up to 15 minutes working time before cure. It has a very low gas emission. 9492 is ideal for multi-purpose applications, for bonding electronic components and it can bond mesh to frames. Colour : White. 9492 will sustain service temperatures up to 180°C.

2011 Araldite Two Part Epoxy Adhesive 50ml

2011 is a multi-purpose two part epoxy adhesive with a long working life and low shrinkage. 2011 is useable for up to 1.5 hours and it is excellent for bonding all metals, GRP, Polyamides, ceramics and wood. 2011 is also good for rubber, glass and PVC. Araldite® 2011 has Aerospace Use approvals from : BAE Systems, Rolls Royce, Westland Helicopters (Finnmecanica). This product must be dispensed by a PQ50 handgun, see "Dispensing" in Menu.
DATA SHEET

2012 Araldite Two Part Epoxy Adhesive 50ml

2012 is a general purpose two part epoxy adhesive with a low shrinkage. 2012 is useable for 8 minutes and it is excellent for bonding metals, GRP, ceramics and wood. 2012 is also good for zinc, rubber, glass and plastics. This product must be dispensed by a PQ50 handgun, see "Dispensing" in Menu.
DATA SHEET

2014-1 Araldite Two Part Epoxy Adhesive 50ml

2014-1 is a high temperature, two part, 2:1 grey paste epoxy adhesive with a low shrinkage and chemical resistance and it is at temperature up to 140°C. 2014-1 is useable for up to 1 hour and it is excellent for bonding all metals, GRP, ceramics and wood. 2014-1 is good for most plastics and rubber and it is moderate, glass and PMMA. This product must be dispensed by a 2:1 PQ50 handgun, see "Dispensing" in Menu.
DATA SHEET

2015 Araldite Two Part Epoxy Adhesive

2015 is a toughened two part epoxy adhesive paste for tough applications and low shrinkage. 2015 is useable for up to 40 minutes. 2015 is ideal for GRP, SMC and for dissimilar substrates. It is excellent for bonding Metals, some Plastics and Wood, it is good for Zinc, PVC, Rubber and Ceramics and it is moderate for glass. This product must be dispensed by a PQ50 handgun, see "Dispensing" in Menu.
DATA SHEET

PRECISION Araldite® Two Part Epoxy Adhesive 30ml

Araldite® PRECISION is a two part, solvent-free, epoxy adhesive supplied as two 15ml tubes in a blister pack. PRECISION is easy to apply by squeezing the contents of both tubes evenly and mixing them to a paste to provide good reliable bonding of metals, wood, ceramics, masonry, glass, dry concrete, leather, cardboard, most plastics, fabric and rubbers. PRECISION is a "slow-setting" epoxy adhesive which allows time for assembly adjustment and alignment before setting. It will fill uneven gaps and it is water and oil resistant. It is long lasting, very strong and it can be sanded and painted over. PRECISION will survive at ambient temperatures down to -50°C.
DATA SHEET

RAPID Araldite® Two Part Epoxy Adhesive 30ml

Araldite® RAPID is a "fast-setting" two part solvent-free epoxy adhesive supplied as two 15ml tubes in a blister pack. RAPID is easy to apply by squeezing the contents of both tubes evenly and mixing them to a paste to provide good quick bonding of metals, wood, ceramics, masonry, glass, dry concrete, leather, cardboard, most plastics, fabric and rubbers. RAPID will fill uneven gaps and it is water and oil resistant. It is long lasting, very strong and it can be sanded and painted over. RAPID will survive at ambient temperatures down to -50°C.
DATA SHEET

RAPID Araldite® Two Part Epoxy Adhesive Syringe

Araldite® RAPID is a "fast-setting" two part solvent-free epoxy adhesive. It is supplied in a blister pack as a 24ml twin-tube cartridge with a syringe plunger for easy, clean and even dispensing. RAPID is easy to apply by squeezing the plunger to dispense the contents of both tubes evenly, then mixing both parts to a paste to provide good quick bonding of metals, wood, ceramics, masonry, glass, dry concrete, leather, cardboard, most plastics, fabric and rubbers. RAPID will fill uneven gaps and it is water and oil resistant. It is long lasting, very strong and it can be sanded and painted over. RAPID will survive at ambient temperatures down to -50°C.
DATA SHEET

2-TON Devcon Two Part Epoxy Adhesive

Devcon "2 Ton" two part epoxy adhesive is an extremely strong medium curing epoxy which is ideal for strong rigid bonds on metals, ceramics, wood, concrete, glass, etc. It is medium viscosity and non-shrink and it bonds in 8 to 12 minutes. Colour : Clear. It can withand temperatures from -40° to +93°C.
DATA SHEET