SCIGRIP (Formerly Holdtite)

For spare nozzles, order MBQ05-16L - 50ml green small square mixer nozzles under 'Dispensing & Equipment' section.

SCIGRIP™ SG5000 Series Methacrylate Adhesives are high strength two-component products for bonding metals, plastics and composites. They offer a unique combination of convenient 1:1 mix ratio and ability to adhere to a wide variety of materials. Most metals, including steel and aluminum,
can be bonded without surface pretreatment. A choice of 3, 6, 13 and 40 minute working times, fast cure and rapid strength build make this series of adhesives an ideal first choice for diverse bonding applications. Packaging options include 25ml syringes; 50 and 400ml cartridges and in 19 and 189 ltr bulk containers for applications with meter-mix dispense equipment.

For spare nozzles, order MBQ05-16L - 50ml green small square mixer nozzles under 'Dispensing & Equipment' section.
SG 5000-06 is a high strength, fast curing 5-7 mins two-part structural adhesive system. On application, the grade’s high viscosity is ideal for both gap filling and vertical surface applications. This unique Methacrylate chemistry can offer excellent tensile and impact strength, even without priming the surfaces. In addition, the advanced macro structure provides the bonded assembly with excellent environmental and chemical resistance in the most demanding applications.

Features:
5th Generation Methacrylate Technology
High Viscosity - Non Slump Application
High Impact Strength & Fatigue Endurance
Fast Cure System
Please enquire lead time for SG5000-06x50ml in Black
PQ50 GUN REQUIRED

For spare nozzles, order MFQ08-24T - 400ml Green Large square mixer nozzles under 'Dispensing & Equipment' Section
SG 5000-06 is a high strength, fast curing 5-7 mins two-part structural adhesive system. On application, the grade’s high viscosity is ideal for both gap filling and vertical surface applications. This unique Methacrylate chemistry can offer excellent tensile and impact strength, even without priming the surfaces. In addition, the advanced macro structure provides the bonded assembly with excellent environmental and chemical resistance in the most demanding applications.

Features:
5th Generation Methacrylate Technology
High Viscosity - Non Slump Application
High Impact Strength & Fatigue Endurance
Fast Cure System
PQ401 GUN REQUIRED

For spare nozzles, order MBQ05-16L - 50ml green small square mixer nozzles under 'Dispensing & Equipment' section.
Sci-Grip 5000-13 is a high strength, two-part structural adhesive system, designed to offer extended open time 10-12 mins for larger and more complex assemblies. On application, the grade’s high viscosity is ideal for both gap filling and vertical surface applications. This unique Methacrylate chemistry can offer excellent tensile and impact strength, even without priming the surfaces. In addition, the advanced macro-structure provides the bonded assembly with excellent environmental and chemical resistance in the most demanding applications.

Features:
5th Generation Methacrylate Technology
High Viscosity - Non Slump Application
High Impact Strength & Fatigue Endurance
Extended Open Time
PQ50 GUN REQUIRED

For spare nozzles, order MBQ05-16L - 50ml green small square mixer nozzles under 'Dispensing & Equipment' section.
SG 5000-06 is a high strength, fast curing 5-7 mins two-part structural adhesive system. On application, the grade’s high viscosity is ideal for both gap filling and vertical surface applications. This unique Methacrylate chemistry can offer excellent tensile and impact strength, even without priming the surfaces. In addition, the advanced macro structure provides the bonded assembly with excellent environmental and chemical resistance in the most demanding applications.
PQ50 GUN REQUIRED

For spare nozzles, order 10:1 x 50ml nozzles (Grey & Orange) under 'Dispensing & Equipment' Section.
SCIGRIP™ SG300 Series Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts. Most metals can be bonded without priming. These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 50 and 490 ml cartridges &19 and 189 ltrs bulk containers for application with meter-mix dispense equipment.
Working Time 4-6 mins/ Fixture Time >15 mins
PQ50 GUN & 10:1 PLUNGER REQUIRED

For spare nozzles, order 10:1 x 50ml nozzles (Grey & Orange) under 'Dispensing & Equipment' Section.
SCIGRIP™ SG300 Series Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts. Most metals can be bonded without priming. These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 50 and 490 ml cartridges and 19 and 189 ltrs bulk containers for application with meter-mix dispense equipment.
Working Time 13-17 mins/ Fixture Time >30 mins
PQ50 GUN & 10:1 PLUNGER REQUIRED

For spare nozzles, order 10:1 x 490ml nozzles (Orange) under 'Dispensing & Equipment' Section.
SCIGRIP™ SG300 Series Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts. Most metals can be bonded without priming. These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 50 and 490 ml cartridges and 19 and 189 ltrs bulk containers for application with meter-mix dispense equipment.
Working Time 4-6 mins/ Fixture Time >15 mins
THIS PRODUCT REQUIRES A 10:1/490ML DISPENSING GUN

For spare nozzles, order 10:1 x 490ml nozzles (Orange) under 'Dispensing & Equipment' Section.
SCIGRIP™ SG300 Series Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts. Most metals can be bonded without priming. These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 50 and 490 ml cartridges and 19 and 189 ltrs bulk containers for application with meter-mix dispense equipment.
Working Time 13-17 mins/ Fixture Time >30 mins
THIS PRODUCT REQUIRES A 10:1/490ML DISPENSING GUN

Scigrip #4SC - Water thin, fast set solvent cement for acrylics. Will also bond other plastics (e.g. styrene, butyrate and polycarbonate) to themselves.
Open Time: 1-2 mins Fixture Time: 3 minutes Shelf life: 2 years

SUBSTRATE RECOMMENDATIONS:
Scigrip #16™ is especially formulated to bond acrylic (poly-methyl methacrylate) plastic. It can also be used for bonding styrene, butyrate, PVC, ABS and polycarbonate, as well as other plastics and porous surfaces.
SUGGESTED BONDING APPLICATIONS AND RECOMMENDATIONS:
SG 16 is recommended as an excellent general purpose, high strength acrylic cement. It is especially useful where fast cure and high strength are desired for applications such as large housings, signs, plastic letters, industrial fabrications, display items, lenses and models.
GENERAL DESCRIPTION:
SG 16 is a very high strength, clear, medium bodied, fast curing, solvent-type acrylic cement. Applied to cast, molded or extruded acrylics, it will affect initial bonds very quickly so some parts may be handled within a few minutes. Bond strength continues to develop very rapidly reaching a substantial level and forming strong joints within hours. This product may be thinned with SG3 by approximately 10%. Initial bond forms very quickly so some parts may be handled within a few minutes of application.
Joints are water and weather resistant and will generally have similar physical and chemical properties to acrylic plastic.